Skip to Main Content »

Category Navigation:

You're currently on:

Strain Gage Input

UEI's strain gage boards (layers) are designed for direct measurement of full-bridge strain gauges, load cells, force sensors, torque sensors as well as any other full-bridge circuitry-based sensors.

Boards feature overvoltage protection and provide isolated fully differential channels with a maximum sampling rate of 8kHz per channel. Strain gage boards support 2 wiring schemes (4 and 6-wire). You can also benefit from internal excitation of sensors through programmable voltage.

You can configure the boards for full-, half- and quarter-bridge measurements and perform onboard shunt calibration using supplied software.

If you have any questions please call us at: (508)-921-4600 or email us at: info@ueidaq.com

7 Item(s)

per page

Grid  List 

Set Descending Direction
  1. DNA-AFDX-664

    DNA-AFDX-664

    2-Channel AFDX / ARINC-664 Interface

    (DNR version shown)

    • For use in “Cube” I/O chassis
    • 2 independent or 1 dual redundant channels
    • 10/100/1000 Base-T implementation
    • Transmit, Receive or Bus Monitor function
    • Consecutive or user defined sequence Numbers
    • 10 µS, 1 µS and 100 nS time tags
    • Error detection and injection
    • Extensive filtering and traffic scheduling
    • Includes support for Boeing EDE protocol

    Add to Wishlist
    Add to Compare

  2. DNA-AI-208

    DNA-AI-208

    8-channel, 18-bit, 8 kS/s per channel, strain gage analog input, data acquisition board

    • 8 differential channels
    • Maximum sampling rate of 8 kHz per channel (total board sample rate limited to 8 kS/s)
    • 18-bit resolution
    • 2 wiring schemes (4- and 6-wire)
    • Gains - 1,2,4,8,10,20,40,80,100,200,400,800
    • Overvoltage protection (-40V..+55V)
    • Full-, Half- and Quarter-bridge configurations
    • Software for onboard shunt calibration
    • Per channel built-in averaging engine from 5Hz, 4096 samples to 1000 Hz , 4 samples

    Add to Wishlist
    Add to Compare

  3. DNA-AI-224

    DNA-AI-224

    4-Channel High Speed Strain Gage Input Board

    • For use with “Cube” chassis
    • 4 Strain Gage input channels
    • 18-bit resolution, 100 kilosample/second
    • Simultaneous sampling on all channels
    • Built-in anti-aliasing filters
    • Full, Half and Quarter Bridge inputs
    • 120, 350 and 1000 ohm bridge completion
    • Built-in tension/compression shunt calibration resistors

    Add to Wishlist
    Add to Compare

  1. DNA-AI-256

    DNA-AI-256

    2-Channel Synchro/Resolver/LVDT/RVDT Interface

    • DNA-AI-256 for use with “Cube” I/O chassis
    • DNR-AI-256 for use with RACKtangle™ I/O chassis (requires two slots in the RACKtangle)
    • 2 input / output channels
    • 16-bit resolution
    • 3-wire (Synchro) and 4-wire (Resolver) inputs
    • 4, 5 and 6-wire LVDT/RVDT support
    • Reference output per channel
    • 5 to 18 Vrms programmable reference
    • 50 Hz to 10 kHz
    • Up to 2.4 VA without external buffer

    Add to Wishlist
    Add to Compare

  2. DNR-AI-208

    DNR-AI-208

    8-channel, 18-bit, 8 kS/s per channel, strain gage analog input, data acquisition board for the PowerDNR RACKtangle®

    • 8 differential channels
    • Maximum sampling rate of 8 kHz per channel (total board sample rate limited to 8 kS/s)
    • 18-bit resolution
    • 2 wiring schemes (4- and 6-wire)
    • Gains - 1,2,4,8,10,20,40,80,100,200,400,800
    • Overvoltage protection (-40V..+55V)
    • Full-, Half- and Quarter-bridge configurations
    • Software for onboard shunt calibration
    • Per channel built-in averaging engine from 5Hz, 4096 samples to 1000 Hz , 4 samples

    Add to Wishlist
    Add to Compare

  3. DNR-AI-224

    DNR-AI-224

    4-Channel High Speed Strain Gage Input Board

    • For use with RACKtangle® I/O chassis
    • 4 Strain Gage input channels
    • 18-bit resolution, 100 kilosample/second
    • Simultaneous sampling on all channels
    • Built-in anti-aliasing filters
    • Full, Half and Quarter Bridge inputs
    • 120, 350 and 1000 ohm bridge completion
    • Built-in tension/compression shunt calibration resistors

    Add to Wishlist
    Add to Compare

  1. DNR-AI-256

    DNR-AI-256

    2-Channel Synchro/Resolver/LVDT/RVDT Interface

    • DNA-AI-256 for use with “Cube” I/O chassis
    • DNR-AI-256 for use with RACKtangle™ I/O chassis
    • 2 input / output channels
    • 16-bit resolution
    • 3-wire (Synchro) and 4-wire (Resolver) inputs
    • 4, 5 and 6-wire LVDT/RVDT support
    • Reference output per channel
    • 5 to 18 Vrms programmable reference
    • 50 Hz to 10 kHz
    • Up to 2.4 VA without external buffer

    Add to Wishlist
    Add to Compare

7 Item(s)

per page

Grid  List 

Set Descending Direction
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Download our Latest Catalog!

About UEI

For more than 15 years, UEI has made continuous efforts in the development of high performance, PC-based, data acquisition (DAQ) products, and support. Continuing to develop and manufacture new and uniquely powerful and configurable hardware is what makes UEI the right choice for data acquisition and control in multiple industries.
More About UEI »