You have no items in your shopping cart.
Voltage/Current Inputs
When configuring your PowerDNA® Distributed I/O Cube or RACKtangle I/O chassis, you may choose from a wide variety of analog input boards (layers). All boards come factory pre-installed and calibrated. Boards are available with up to 25 input channels, up to 24-bit resolution and up to 250 ksamples per second. Regardless of your application, we're sure to have a board that will make the measurement you need.
The table below provides a brief overview of the currently available analog input boards. In the unlikely event you don't see what you need, please give us a call or send us an email. We are working on new boards all the time. The board you need might only be weeks away.
| Board/Layer |  |
 |
 |
 |
 |
 |
 |
Notes: |
|---|---|---|---|---|---|---|---|---|
| DNA/DNR-AI-201-100 | 24/12 | 16 | 100 ks/s | 100 ks/s | no | ±1.5 to ±15 | 4 | |
| DNA/DNR-AI-202 | 12 | 16 | 16 ks/s | 16 ks/s | no | ±1.5 mA to ±150 mA | 3 | Current inputs |
| DNA/DNR-AI-205 | 4 DIFF | 18 | 250 ks/s | 500 ks/s | yes | ±0.1 to ±100 | 4 | Channel to channel isolation |
| DNA/DNR-AI-207 | 16 DIFF | 18 | 1 ks/s | 16 ks/s | no | ±0.0125 to ± ±10 | 12 | Additional channel included for CJC sensing |
| DNA/DNR-AI-208 | 8 DIFF | 18 | 1 ks/s | 16 ks/s | no | ±0.0125 to ± ±10 | 12 | Strain gage input with built-in excitation |
| DNA/DNR-AI-211 | 4 | 24 | 125 ks/s | 500 ks/s | yes | +25/-12.5 to ±3.125 | 1 | IEPE/ICP® Vibration Sensor Interface |
| DNA/DNR-AI-217 | 16 | 24 | 120 ks/s | 480 ks/s | yes | ±0.156 to ±10 | 7 | 16-Channel (+1 CJC), 24-bit simultaneously sampling A/D board |
| DNA/DNR-AI-224 | 4 | 18 | 100 ks/s | 100 ks/s | yes | ±0.0125 to ±10 | 10 | 4-Channel High Speed Strain Gage Input Board |
| DNA/DNR-AI-225 | 25 DIFF | 24 | 1 ks/s | 25 ks/s | yes | ±1.25 | 1 | One A/D per channel, wide assortment of signal conditioning |
| DNA/DNR-AI-254 | 4 | 16 | 500 s/s | 2 ks/s | no | 10Vrms | 1 | 4-Channel LVDT/RVDT Interface |
| DNA/DNR-AI-255 | 2 | 16 | 800 s/s | 1.6 ks/s | no | 10 Vrms | 1 | 2-Channel Synchro/Resolver Interface |
The boards shown above are supported by a wide assortment of signal conditioning interfaces. In particular note the DNA/DNR-AI-207 and DNA/DNR-AI-225 offer incredible thermocouple measurement capability when used in conjunction with the DNA-STP-AI-series of screw terminal panels.
If you have any questions please call us at: (508)-921-4600 or email us at: info@ueidaq.com
-
DNA-AFDX-664
2-Channel AFDX / ARINC-664 Interface
- For use in “Cube” I/O chassis
- 2 independent or 1 dual redundant channels
- 10/100/1000 Base-T implementation
- Transmit, Receive or Bus Monitor function
- Consecutive or user defined equence Numbers
- 10 µS, 1 µS and 100 nS time tags
- Error detection and injection
- Extensive filering and traffic scheduling
- Includes support for Boeing EDE protocol
- Preliminary — price TBD
-
DNA-AI-201-100
24-channel, 16-bit, 100 kS/s aggregate, analog input, data acquisition board
- 24-channels (24 single-ended/12 differential)
- 16-bit resolution
- Max sampling rate to 100 kS/s
- ±15V input range
- Gains of 1, 2, 5 and 10
-
DNA-AI-202
12-channel, 16-bit, 16 kS/s aggregate, analog input, data acquisition board
- 12 differential current inputs
- 16-bit resolution
- Max sampling rate to 16 kS/s
- Autocalibration
- Input ranges ±150 mA, ±15 mA, ±1.5 mA (covers industrial ranges 0-20mA and 4-20mA)
- Analog front end isolated from digital circuitry
-
DNA-AI-205
4-channel, 18-bit, 250 kS/s per channel, simultaneous sampling analog input, data acquisition board
- Four fully isolated differential channels
- ±100V max input range
- 18-bit resolution
- Maximum sampling rate of 250kHz per channel
- Overvoltage protection
- 3-stage FIR unit with optional stage bypass
- Simultaneous sampling
-
DNA-AI-207
16-channel, 18-bit, 1 kS/s per channel, analog input, data acquisition board
- 16 differential channels
- Additional dedicated CJC channel
- Maximum sampling rate of 1kHz per channel
- 18-bit resolution
- ±10V input range
- Gains - 1,2,4,8,10,20,40,80,100,200,400,800
- Overvoltage protection (-40V to +55V)
- Direct Inputs for thermocouples (with DNA-STP-AI-U panel)
- Embedded averaging engine
-
DNA-AI-208
8-channel, 18-bit, 8 kS/s per channel, strain gage analog input, data acquisition board
- 8 differential channels
- Maximum sampling rate of 8 kHz per channel (total board sample rate limited to 8 kS/s)
- 18-bit resolution
- 2 wiring schemes (4- and 6-wire)
- Gains - 1,2,4,8,10,20,40,80,100,200,400,800
- Overvoltage protection (-40V..+55V)
- Full-, Half- and Quarter-bridge configurations
- Software for onboard shunt calibration
- Per channel built-in averaging engine from 5Hz, 4096 samples to 1000 Hz , 4 samples
-
DNA-AI-211
4-channel IEPE / ICP® Vibration Sensor Interface
- 4 Independent 24-bit input channels
- 125 KSPS maximum sample rate (each channel)
- Digital anti-aliasing filter provides 100 dB attenuation
- 350 VDC channel to channel isolation
- 0 to 8 mA excitation, user selectable in 256 steps
- Status LEDs indicate open or shorted sensors
- 10-32 UNF coaxial connections provided by DNA-ACC-211 (included with purchase)
- 6.75 W, max (Cubes should include DNA-FAN option if mulitple AI-211s are installed)
-
DNA-AI-217
16-Channel, 24-bit simultaneously sampling A/D board
- For use in “CUBE” chassis
- 16 differential analog input channels (+ one CJC channel)
- Simultaneous sampling (one A/D converter per channel)
- Direct Inputs for thermocouples (w/ DNA-STP-AI-U or DNA-STP-AI-207TC panel)
- 120 kHz per channel sample rate (480 kHz board max)
- 24-bit resolution
- “Open” input wiring detection
- Input over-range detection
- Gains - 1, 2, 4, 8, 16, 32 and 64
- Pin compatible with DNx-AI-207
-
DNA-AI-218
8-Channel, 24-bit, fully isolated A/D board
(DNR-AI-218 shown in photo)
- For use in “CUBE” chassis
- 8 differential analog input channels
- 350 Vrms isolation (channel to channel and channel to chassis)
- Simultaneous sampling (one A/D converter per channel)
- Built-in anti-aliasing filters (@ 48% of sample rate)
- 120 kHz per channel sample rate (480 kHz board max)
- 24-bit resolution
- Gains - 1, 2, 4, 8, 16, 32 and 64
