24-channel, 16-bit, 100 kS/s aggregate, analog input, data acquisition, layer for the PowerDNR RACKtangle®

• 24-channels (24 single-ended/12 differential)
• 16-bit resolution
• Max sampling rate to 100 kS/s
• ±15V input range
• Gains of 1, 2, 5 and 10

12-channel, 16-bit, 16 kS/s aggregate, analog input, data acquisition board for the PowerDNR RACKtangle®

• 12 differential current inputs
• 16-bit resolution
• Max sampling rate to 16 kS/s
• Autocalibration
• Input ranges ±150 mA, ±15 mA, ±1.5 mA (covers industrial ranges 0-20mA and 4-20mA)
• Analog front end isolated from digital circuitry

4-channel, 18-bit, 250 kS/s per channel, simultaneous sampling analog input, data acquisition board for the PowerDNR RACKtangle®

• Four fully isolated differential channels
• ±100V max input range
• 18-bit resolution
• Maximum sampling rate of 250kHz per channel
• Overvoltage protection
• 3-stage FIR unit with optional stage bypass
• Simultaneous sampling

16-channel, 18-bit, 1 kS/s per channel, analog input, data acquisition board for the PowerDNR RACKtangle®

• 16 differential channels
• Additional dedicated CJC channel
• Maximum sampling rate of 1kHz per channel
• 18-bit resolution
• ±10V input range
• Gains - 1, 2, 4, 8, 10, 20, 40, 80, 100, 200, 400, 800
• Overvoltage protection (-40V to +55V)
• Direct Inputs for thermocouples (with DNA-STP-AI-U panel)
• Embedded averaging engine

8-channel, 18-bit, 8 kS/s per channel, strain gage analog input, data acquisition board for the PowerDNR RACKtangle®

• 8 differential channels
• Maximum sampling rate of 8 kHz per channel (total board sample rate limited to 8 kS/s)
• 18-bit resolution
• 2 wiring schemes (4- and 6-wire)
• Gains - 1,2,4,8,10,20,40,80,100,200,400,800
• Overvoltage protection (-40V..+55V)
• Full-, Half- and Quarter-bridge configurations
• Software for onboard shunt calibration
• Per channel built-in averaging engine from 5Hz, 4096 samples to 1000 Hz , 4 samples

4-channel IEPE / ICP® Vibration Sensor Interface for the PowerDNR RACKtangle®

• 4 Independent 24-bit input channels
• 125 KSPS maximum sample rate (each channel)
• Digital anti-aliasing filter provides 100 dB attenuation
• 350 VDC channel to channel isolation
• 0 to 8 mA excitation, user selectable in 256 steps
• Status LEDs indicate open or shorted sensors
• 10-32 UNF coaxial connections provided by DNA-ACC-211 (included with purchase)
• 6.75 W, max (Cubes should include DNA-FAN option if mulitple AI-211s are installed)

16-Channel, 24-bit simultaneously sampling A/D board for PowerDNR RACKtangle®

• For RACKtangle® I/O chassis
• 16 differential analog input channels (+ one CJC channel)
• Simultaneous sampling (one A/D converter per channel)
• Direct Inputs for thermocouples (w/ DNA-STP-AI-U or DNA-STP-AI-207TC panel)
• 120 kHz per channel sample rate (480 kHz board max)
• 24-bit resolution
• “Open” input wiring detection
• Input over-range detection
• Gains - 1, 2, 4, 8, 16, 32 and 64
• Pin compatible with DNx-AI-207

8-Channel, 24-bit, fully isolated A/D board

• For use in RACKtangle® chassis
• 8 differential analog input channels
• 350 Vrms isolation (channel to channel and channel to chassis)
• Simultaneous sampling (one A/D converter per channel)
• Built-in anti-aliasing filters (@ 48% of sample rate)
• 120 kHz per channel sample rate (480 kHz board max)
• 24-bit resolution
• Gains - 1, 2, 4, 8, 16, 32 and 64

12-Channel, fully isolated RTD/resistance input board

• For use in RACKtangle™ I/O chassis
• 12 fully differential analog input channels
• 2, 3 and 4 wire connections
• 100 Ohm DIN and US measurements
• Channel-to-channel and channel-to-chassis isolation
• 0.005 °C resolution, 0.2 °C accuracy
• 0 to 40,000 Ω resistance measurement range
• Built-in 50, 60 and 400 Hz rejection (at select sample rates)
• 100 Hz, per channel sample rates