Skip to Main Content »

Category Navigation:

Request a Quote Contact a Sales Person Ask an Expert
Latest Videos  UEI Webinars

You're currently on:

ARINC 429/708/453/664

ARINC 429 is the avionics data bus standard used on most high-end commercial aircraft. The standard defines both the physical and electrical interfaces of a two-wire data bus as well as the data protocol to support an aircraft's avionics network.

The DNA/DNR-429-5xx series is a family of ARINC 429 communications interfaces. The current family includes two different versions with different combinations of TX and RX channels. The DNA-429-566 offers 6 TX / 6 RX while the 429-512 provides 12 RX channels. All boards are fully compliant with the ARINC 429 spec and support both high speed (100 kHz) and low speed (12.5 kHz) operation. The channel speed is software selectable in banks of either two or three channels. Data integrity, even when all channels are set in high speed mode is assured with the use of 256 word FIFOs on all RX and TX channels

All of the DNA-429-5xx series boards are fully supported by UEI's wide variety of software drivers and programming tools.

Looking for MIL-STD-1553?

If you have any questions please call us at: (508)-921-4600 or email us at: info@ueidaq.com

Items 1 to 9 of 10 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. DNA-429-512

    DNA-429-512

    ARINC 429 Interface board with 12 RX channels

    • 12 ARINC 429 RX channels
    • High (100 kHz) or low (12.5 kHz) speed selectable by channel
    • Hardware Label filtering
    • Hardware TX scheduler (100 µs timing resolution)
    • Automatic timestamping of RX data (if desired)
    • Powerful API included

    Add to Wishlist
    Add to Compare

  2. DNA-429-516

    DNA-429-516

    16-channel TX ARINC 429 Interface

    (DNR version shown)

    • For use in UEI “Cubes”
    • 16 ARINC 429 transmit channels
    • High (100 kHz) or low (12.5 kHz) speed selectable by channel
    • Hardware Label filtering
    • Hardware TX scheduler (100 µs timing resolution)
    • 350 Vrms Isolation (in 8 groups of 2-channels)
    • Guardian Series Diagnostics:
      On-board 429 RXs allow read-back on each channel
    • Supports ARINC-615 and Williamsburg protocols

    Add to Wishlist
    Add to Compare

  3. DNA-429-566

    DNA-429-566

    ARINC 429 Interface board with 6 TX and 6 RX channels

    • 6 ARINC 429 TX channels
    • 6 ARINC 429 RX channels
    • High (100 kHz) or low (12.5 kHz) speed selectable by channel
    • Hardware Label filtering
    • Hardware TX scheduler (100 µs timing resolution)
    • Automatic timestamping of RX data (if desired)
    • Powerful API included
    • Supports ARINC-615 and Williamsburg protocols

    Add to Wishlist
    Add to Compare

  1. DNA-708-453

    DNA-708-453

    ARINC-708/453/WxPD interface with two TX and two RX channels.

    • 2 Transmit outputs
    • 2 Receive inputs
    • ARINC-708 and ARINC-453 compatible
    • WxPD protocol support
    • Includes coaxial cable adaptor

    Add to Wishlist
    Add to Compare

  2. DNA-AFDX-664

    DNA-AFDX-664

    2-Channel AFDX®/ARINC-664 Interface

    (DNR version shown)

    • For use in “Cube” I/O chassis
    • 2 independent or 1 dual redundant channels
    • 10/100/1000 Base-T implementation
    • Transmit, Receive or Bus Monitor function
    • Consecutive or user defined sequence Numbers
    • 10 µS, 1 µS and 100 nS time tags
    • Error detection and injection
    • Extensive filtering and traffic scheduling
    • Includes support for Boeing EDE protocol
    • Supports ARINC-615A protocol

    Add to Wishlist
    Add to Compare

  3. DNR-429-512

    DNR-429-512

    ARINC 429 Interface with 12 RX channels for the PowerDNR RACKtangle®

    • 12 ARINC 429 RX channels
    • High (100 kHz) or low (12.5 kHz) speed selectable by channel
    • Hardware Label filtering
    • Hardware TX scheduler (100 µs timing resolution)
    • Automatic timestamping of RX data (if desired)
    • Powerful API included

    Add to Wishlist
    Add to Compare

  1. DNR-429-516

    DNR-429-516

    16-channel TX ARINC 429 Interface

    • For use in UEI RACKtangle® I/O chassis
    • 16 ARINC 429 transmit channels
    • High (100 kHz) or low (12.5 kHz) speed selectable by channel
    • Hardware Label filtering
    • Hardware TX scheduler (100 µs timing resolution)
    • 350 Vrms Isolation (in 8 groups of 2-channels)
    • Guardian Series Diagnostics:
      On-board 429 RXs allow read-back on each channel
    • Supports ARINC-615 and Williamsburg protocols

    Add to Wishlist
    Add to Compare

  2. DNR-429-566

    DNR-429-566

    ARINC 429 Interface with 6 TX and 6 RX channels for the PowerDNR RACKtangle®

    • 6 ARINC 429 TX channels
    • 6 ARINC 429 RX channels
    • High (100 kHz) or low (12.5 kHz) speed selectable by channel
    • Hardware Label filtering
    • Hardware TX scheduler (100 µs timing resolution)
    • Automatic timestamping of RX data (if desired)
    • Powerful API included
    • Supports ARINC-615 and Williamsburg protocols

    Add to Wishlist
    Add to Compare

  3. DNR-708-453

    DNR-708-453

    ARINC-708/453/WxPD interface with two TX and two RX channels.

    • 2 Transmit outputs
    • 2 Receive inputs
    • ARINC-708 and ARINC-453 compatible
    • WxPD protocol support
    • Includes coaxial cable adaptor

    Add to Wishlist
    Add to Compare

Items 1 to 9 of 10 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Download our Latest Catalog!

About UEI

For more than 15 years, UEI has made continuous efforts in the development of high performance, PC-based, data acquisition (DAQ) products, and support. Continuing to develop and manufacture new and uniquely powerful and configurable hardware is what makes UEI the right choice for data acquisition and control in multiple industries.
More About UEI »