 Q000245:
I have an AC input of +/-100V pk-pk, how can I apply that to AI-205 layer.
|
|
Q000258:
What is the accuracy of DNA-AI-225 layer when used with DNA-STP-AI-U terminal panel?
|
|
Q000264:
What is the correspondence between resolution in bits and percentile values for 12/16/24 bit data acquisition devices?
|
|
Q000266:
Is there documentation on use of the AI-225 layer with thermocouples?
|
|
Q000271:
How long of a switching time of the multiplexer is needed to collect samples from channel to channel on the AI-201-100?
|
|
Q000272:
When will UEI support the RoHS directive?
|
|
Q000281:
Does the 120mA limit on the DNA-AI-208 layer apply to the "total load",
which is really the combined load of whatever two channels are on
simultaneously?. Also, does this also mean that the layer must never
drive a 120ohm bridge at 10 volts (which would consume 83mA)?
|
|
Q000286:
Why does my thermocouple reading not go any higher than 739(or 422 or 985 etc.) degrees?
|
|
Q000346:
What is the warm up time for the DNA-AI-201-100?
|
|
Q000347:
what is the warm up time for the DNA-AI-225?
|
|
|
