Skip to Main Content »

Category Navigation:

Request a Quote Contact a Sales Person Ask an Expert
See us on

You're currently on:

Multifunction Boards

When you know you'll be setting up a stimulus/response test, when you know you'll be implementing a closed-loop system or if you just want to be ready for any kind of testing situation, a multifunction board is the logical choice. Our PD2-MF Series PCI multifunction data acquisition and control boards pack everything you'll likely need: as many as 64 single-ended/32 differential analog to digital inputs running at speeds to 3 MS/s, dual analog outputs, 32 digital I/O lines plus three counter/timers available to users.

To allow all these I/O subsystems to run simultaneously without loading down the host CPU, MF Series cards run under control of a Motorola DSP. Thus you can collect analog samples while generating waveforms yet have the resources to perform digital I/O and run the counter/timers - all at the same time. Operating in this fashion presents no constraints on setup parameters, either: a custom PGIA (programmable-gain instrumentation amplifier) design runs any or all channels at different gains without the need to trade off peak throughput rate or accuracy.

We supply a complete set of drivers for all popular programming languages and third-party applications including LabVIEW and Agilent VEE - and at no additional charge. The support package also comes with example programs, complete with source code, that are so extensive that some of them might be enough to solve your problem straight out of the box.

To achieve optimum performance under Windows, we wrote the boards' 32-bit driver from scratch without relying on any legacy code. This advanced protocol-based driver works with shareable buffers in system RAM and makes obsolete traditional register-based drivers and double-buffering schemes. MF Series boards can stream data to disk continuously, gap-free, at the hardware's peak acquisition rates.

If you have any questions please call us at: (508)-921-4600 or email us at: info@ueidaq.com

Items 1 to 9 of 20 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. PD2-MF-16-150/16H

    PD2-MF-16-150/16H

    150 kS/s, 16-bit, 1/2/4/8 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 16-bit resolution, 150 kS/s sampling rate
    • Gains: 1, 2, 4, 8
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  2. PD2-MF-16-150/16L

    PD2-MF-16-150/16L

    150 kS/s, 16-bit, 1/10/100/1000 gains, 16SE/8DI PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 16-bit resolution, 150 kS/s sampling rate
    • Gains: 1, 10, 100, 1000
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  3. PD2-MF-16-2M/14H

    PD2-MF-16-2M/14H

    2.2 MS/s, 14-bit, 1/2/4/8 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 14-bit resolution, 2.2 MS/s sampling rate
    • Gains: 1, 2, 4, 8
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  1. PD2-MF-16-333/16H

    PD2-MF-16-333/16H

    333 kS/s, 16-bit, 1/2/4/8 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 16-bit resolution, 333 kS/s sampling rate
    • Gains: 1, 2, 4, 8
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  2. PD2-MF-16-333/16L

    PD2-MF-16-333/16L

    333 kS/s, 16-bit, 1/10/100/1000 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 16-bit resolution, 333 kS/s sampling rate
    • Gains: 1, 10, 100, 1000
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  3. PD2-MF-16-3M/12H

    PD2-MF-16-3M/12H

    3 MS/s, 12-bit, 1/2/4/8 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 12-bit resolution, 3 MS/s sampling rate
    • Gains: 1, 2, 4, 8
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  1. PD2-MF-16-3M/12L

    PD2-MF-16-3M/12L

    3 MS/s, 12-bit, 1/10/100/1000 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 12-bit resolution, 3 MS/s sampling rate
    • Gains: 1, 10, 100, 1000
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  2. PD2-MF-16-400/14H

    PD2-MF-16-400/14H

    400 kS/s, 14-bit, 1/2/4/8 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 14-bit resolution, 400 kS/s sampling rate
    • Gains: 1, 2, 4, 8
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

  3. PD2-MF-16-400/14L

    PD2-MF-16-400/14L

    400 kS/s, 14-bit, 1/10/100/1000 gains, 16SE/8DI A/D PCI multifunction board

    • For PCI bus
    • 16 single-ended or 8 differential A/D inputs
    • 14-bit resolution, 400 kS/s sampling rate
    • Gains: 1, 10, 100, 1000
    • Two 12-bit analog outputs; 32 digital I/O lines; three 16-bit counter/timers
    • Simultaneous operation of all subsytems
    • Stream-to-disk capability
    • Multiple boards operate in one PC
    • Calibration certificate included
    • PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux

    Add to Wishlist
    Add to Compare

Items 1 to 9 of 20 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Download our Latest Catalog!

About UEI

For more than 15 years, UEI has made continuous efforts in the development of high performance, PC-based, data acquisition (DAQ) products, and support. Continuing to develop and manufacture new and uniquely powerful and configurable hardware is what makes UEI the right choice for data acquisition and control in multiple industries.
More About UEI »