Dual Channel MIL-STD-1553 interface board for Cube I/O chassis

• 2 Independent, dual redundant bus interfaces
• Bus Controller (BC), Remote Terminal (RT) or Bus Monitor (MT) modes
• Multiple RT simulation up to 31 RTs
• Supports 1553A or 1553B protocols (including notice 2)
• Transformer or Direct Coupling

ARINC 429 Interface board with 12 RX channels

• 12 ARINC 429 RX channels
• High (100 kHz) or low (12.5 kHz) speed selectable by channel
• Hardware Label filtering
• Hardware TX scheduler (100 µs timing resolution)
• Automatic timestamping of RX data (if desired)
• Powerful API included

ARINC 429 Interface board with 6 TX and 6 RX channels

• 6 ARINC 429 TX channels
• 6 ARINC 429 RX channels
• High (100 kHz) or low (12.5 kHz) speed selectable by channel
• Hardware Label filtering
• Hardware TX scheduler (100 µs timing resolution)
• Automatic timestamping of RX data (if desired)
• Powerful API included

24-channel, 16-bit, 100 kS/s aggregate, analog input, data acquisition board

• 24-channels (24 single-ended/12 differential)
• 16-bit resolution
• Max sampling rate to 100 kS/s
• ±15V input range
• Gains of 1, 2, 5 and 10

12-channel, 16-bit, 16 kS/s aggregate, analog input, data acquisition board

• 12 differential current inputs
• 16-bit resolution
• Max sampling rate to 16 kS/s
• Autocalibration
• Input ranges ±150 mA, ±15 mA, ±1.5 mA (covers industrial ranges 0-20mA and 4-20mA)
• Analog front end isolated from digital circuitry

4-channel, 18-bit, 250 kS/s per channel, simultaneous sampling analog input, data acquisition board

• Four fully isolated differential channels
• ±100V max input range
• 18-bit resolution
• Maximum sampling rate of 250kHz per channel
• Overvoltage protection
• 3-stage FIR unit with optional stage bypass
• Simultaneous sampling

16-channel, 18-bit, 1 kS/s per channel, analog input, data acquisition board

• 16 differential channels
• Additional dedicated CJC channel
• Maximum sampling rate of 1kHz per channel
• 18-bit resolution
• ±10V input range
• Gains - 1,2,4,8,10,20,40,80,100,200,400,800
• Overvoltage protection (-40V to +55V)
• Dynamic autozero support
• Direct Inputs for thermocouples (with DNA-STP-AI-U panel)
• Embedded averaging engine

8-channel, 18-bit, 8 kS/s per channel, strain gage analog input, data acquisition board

• 8 differential channels
• Maximum sampling rate of 8 kHz per channel (total board sample rate limited to 8 kS/s)
• 18-bit resolution
• 2 wiring schemes (4- and 6-wire)
• Gains - 1,2,4,8,10,20,40,80,100,200,400,800
• Overvoltage protection (-40V..+55V)
• Full-, Half- and Quarter-bridge configurations
• Software for onboard shunt calibration
• Per channel built-in averaging engine from 5Hz, 4096 samples to 1000 Hz , 4 samples

4-channel IEPE / ICP® Vibration Sensor Interface

• 4 Independent 24-bit input channels
• 125 KSPS maximum sample rate (each channel)
• Digital anti-aliasing filter provides 100 dB attenuation
• 350 VDC channel to channel isolation
• 0 to 8 mA excitation, user selectable in 256 steps
• Status LEDs indicate open or shorted sensors
• 10-32 UNF coaxial connections provided by DNA-ACC-211 (included with purchase)
• 6.75 W, max (Cubes should include DNA-FAN option if mulitple AI-211s are installed)