You have no items in your shopping cart.
Analog Output
When configuring an I/O Cube, users can choose from these boards (Layers) for analog output functions. They come factory pre-installed and calibrated.
Standard modules provide eight analog output channels with various resolutions and standard ranges. For higher output currents or voltages, you can choose from several options that come as internal assemblies; however, some of these assemblies require external auxiliary power supplies.
If you have any questions please call us at: (508)-921-4600 or email us at: info@ueidaq.com
-
DNA-AO-308
8-Channel, 16-bit, 100 kS/s per channel, ±10V Analog Output Board
- 8 analog output channels (independent DACs)
- 16-bit resolution
- 100kHz per channel max update rate
- ±10V output range, ±5mA per channel
- Glitch-free output
- Per-channel offset and gain calibration
- Simultaneous update across all channels
-
DNA-AO-308-020
8-Channel, 16-bit, 100 kS/s per channel, 0-20mA Current Output Board
- 8 analog output channels (independent DACs)
- 16-bit resolution
- 100kHz per channel max update rate
- 4-20mA current output
- Glitch-free output
- Per-channel offset and gain calibration
- Simultaneous update across all channels
-
DNA-AO-308-350
8-Channel, 16-bit, 100 kS/s per channel, ±10V High-Current Analog Output Board
- 8 analog output channels (independent DACs)
- 16-bit resolution
- ±10 V output range, ±50 mA per channel (max)
- 100 kHz per channel max update rate
- Force/sense lines (improves output accuracy)
- Glitch-free output
- Per-channel offset and gain calibration
- Simultaneous update across all channels
-
DNA-AO-308-353
8-Channel, 16-bit, 100 kS/s per channel, ±40V High-Voltage Analog Output Board
- 8 analog output channels (independent DACs)
- 16-bit resolution
- 100kHz per channel max update rate
- ±40V output range, ±5 mA per channel
- Glitch-free output
- Per-channel offset and gain calibration
- Simultaneous update across all channels
- Requires external ±45V power source or can be powered internally using the DNA-PC-913 power conversion layer
-
DNA-AO-308-420
8-Channel, 16-bit, 100 kS/s per channel, 4-20mA Current Output Board
- 8 analog output channels (independent DACs)
- 16-bit resolution
- 100kHz per channel max update rate
- 4-20mA current output
- Glitch-free output
- Per-channel offset and gain calibration
- Simultaneous update across all channels
-
DNA-AO-332
32-channel, 16-bit analog output board
- 32 Analog output channels
- 16-bit resolution
- ±10 mA output drive
- Simultaneous or independent updates on all channels
- 10 kHz maximum update rate
- Low glitch outputs
-
DNA-AO-333
32-channel, 16-bit analog output board with analog voltage readback
- 32 independent 16-bit DACs
- On-board A/D converters monitor analog output voltages
- 10 kHz per channel max update rate
- ±10 V output range, ±10 mA per channel
- Per-channel offset and gain calibration
- Simultaneous update across all channels (if desired)
-
DNA-AO-358
8-Channel Strain gage Simulator Board
- 8 Simulated strain gages
- Configured as Full, Half or Quarter bridge
- 120, 350 and 1k Ohm standard configurations
- AC or DC excitation
- >250 kHz bandwidth
- Wide ±15 V excitation range
- On-board A/D converter monitors excitation voltage
-
DNA-IRIG-650
IRIG-A, B, E and G Timing Generation and Synchronization board
- IRIG-A, B, E and G output allows cube to provide timing signals
- IRIG-A, B, E and G input allows cube to synchronize with external IRIG-A, B, E and G sources
- Modulated or DC level inputs and outputs
- 1 PPS output
- Event input captures timing to UTC
- DNA-GPS input
- 10 MHz, 1 ppm time base or slaved to external 10 MHz
- DNA-CBL-650 cable (included with purchase) provides BNC connections for Clock/IRIG signals and 37-pin connections for other I/O
