12- slot, Simulink Coder target, Military style I/O rack

The UEISIM 1200-MIL is a deployment of UEI's popular RACKtangle architecture. Though the original RACKtangles are quite rugged, the DNR-MIL series takes ruggedness to the extreme. Designed for use in the toughest environments, the new RACKtangle is an ideal solution for military and aerospace deployments. The form factor is also ideal for a huge assortment of commercial applications including use on oil drilling platforms and refineries, heavy machinery, outdoor test stands and any other I/O application that will be exposed to the elements. All connectivity is through ROHS compliant 38999 connectors.

Electronically, the UEISIM 1200-MIL RACKtangle is identical to the standard DNR series RACKtangle except for the added hold-up and protection circuitry added to the power supply inputs. (This power supply conditioning is required in order to meet MIL-STD-1275.) This means the DNR-MIL uses our standard DNR-series board (e.g. DNR-AI-217 or DNR-1553-553). With over 90 unique I/O boards and 12 slots available there's sure to be a configuration perfectly matching your application.

The new RACKtangle is designed to meet the most commonly required elements of MIL-STD-461 and -810 and is sealed to at least IP66/NEMA6 standards. All this is housed in a compact 17.5" x 8.125" x 7" chassis, weighing less than 22 pounds and typically consuming less than 40 Watts. In addition, no rotary cooling fans are used in the design which maximizes MTBF and mechanical reliability. All internal printed circuit boards are conformal coated to ensure the highest reliability.

Six easy steps and your simulation is running live on real hardware. To use the UEISIM simply:

1. Build your Simulink application.
2. Open MATLAB, and select Simulink/Embedded target for UEISIM.
3. Convert your model to use the UEISIM I/O blocks (if you had not used them in your original model).
4. Create and executable via Simulink Coder.
5. Connect the UEISIM in "expandable mode" (if you wish to remotely monitor the application while running on the UEISIM).
6. Start your simulation.

UEI can help support Hardware-in-the-loop (HIL) in your control, test, and monitoring applications.

Mathworks Embedded Coder® & UEI Solutions

Mathworks Embedded Coder® generates readable, compact, and fast C and C++ code for embedded processors used in mass production. Embedded Coder is available for use on UEIPAC and UEISIM systems. The choice of Embedded Coder versus Simulink Coder is done when selecting the system target file (same as what you would do to select PowerPC, SoloX ARM, or Zynq UltraScale+ CPU targets).

For information on Embedded Coder® used with UEI solutions, please contact sales@ueidaq.com.