Okay

Get in Touch

General
(508) 921-4600
Email Sales
Email Support

UEI Europe Office
+49 40 63698136
Email EU Sales

Visit this page for local offices and distributors.

Powerful, flexible, 7-Slot, 100Base-T, Simulink Coder target, ideal for HIL applications

UEISIM 700

Features

Simulink/Simulink Coder Target Cube with 7 I/O slots

  • Simulink applications, compiled Simulink Coder run standalone on the I/O cube
  • Powerful, compact and rugged
  • 4" x 4.1" x 6.6" provides 7 I/O slots
  • Supports up to 5k "loops" per second
  • Ideal for HIL (Hardware-in-the-loop) applications
  • Ideal for development, prototype and production
  • Standard Linux OS (2.6.x Kernel)
  • Flexible: Over 90 I/O boards available including A/D, D/A, Digital I/O, Counter/Timer, Quadrature encoder, Serial, CAN and ARINC 429 communications
  • Support for Matlab R2017A and R2017B
Powerful, flexible, 7-Slot, 100Base-T, Simulink Coder target, ideal for HIL applications
Software/Programming: How UEI solutions are used. Hosted - Connected to a PC with Windows, Linux, QNX, VxWorks, RTX, or similar OS. Hosted also is for OPC-UA, Modbus and EtherCAT. Standalone - Controller with Linux or VxWorks OS, Simulink I/O Target or UEILogger. Available options for this product are shown in the drop down menu.
Quantity: $3910
Add to Cart

Typically in stock for shipment in 2-3 weeks. Pricing effective January 1, 2022.

UEISIM 700

This product has been covered by UEI’s 10-year availability guarantee. Please be advised that on March 31, 2023 the 10-year clock was started, and we cannot promise delivery of this product after March 31, 2033.

The UEISIM 700 offers an unprecedented combination of flexibility, high performance, low cost and small size (4" x 4" x 6.6"). Models built in Simulink are deployed directly on the UEISIM using Simulink Coder. The combination creates a powerful new solution in the creation and tuning of many real-time and non-real-time applications. These include simulation model verification, rapid prototyping, and hardware-in-the-loop testing. The UEISIM is rugged, flexible and expandable enough that it is not only a great solution while in your development cycle, it's also the ideal solution for your production hardware.

Six easy steps and your simulation is running live on real hardware. To use the UEISIM simply:

  1. Build your Simulink application.
  2. Open MATLAB, and select Simulink/Embedded target for UEISIM.
  3. Convert your model to use the UEISIM I/O blocks (if you had not used them in your original model).
  4. Create and executable via Simulink Coder.
  5. Connect the UEISIM in "expandable mode" (if you wish to remotely monitor the application while running on the UEISIM).
  6. Start your simulation.

Each UEISIM 700 Cube contains the PowerPC processor preloaded with the a standard Linux operating system (currently 2.6.x). It also contains the ethernet port, a single port ethernet switch, serial port, intercube sync interface and 6 I/O slots and allows up to 150 analog inputs or 288 DIO channels. The UEISIM uses the same I/O boards as our popular PowerDNA family and includes analog input (with up to 24 bit resolution), analog output (up to 32 channels PER BOARD), digital I/O, Serial and CAN communications, ARINC-429 networking, counter/timer, quadrature encoder input and more. With over 90 different I/O boards available there is sure to be a configuration perfect for your application.

UEI can help support Hardware-in-the-loop (HIL) in your control, test, and monitoring applications.

Downloads

Compatibility

Related Media

How to Build a Simulink Model for UEISIM

See how to build a Simulink model using United Electronic Industries' UEISIM library. #IO #gsm #cdma #wireless #mathworks #setup #demo #howto #guide

Explore UEI's embedded system solutions at https://www.ueidaq.com/program...
Explore UEI's software and programming options at https://www.ueidaq.com/support...

How to deploy your SIMULINK model on UEI Hardware

In this video, we will build a Simulink model and deploy it on our data acquisition and control hardware (UEISIM). #standalone #IO #demo #howto #guide

Explore UEI's software and programming options at https://www.ueidaq.com/support/software-programming

Control/Monitoring options for your model on UEI Hardware - Part 2

Independent monitoring and control via .NET, LabVIEW, Simulink, and an internet browser with the UEISIM. #software #interface #demo

Explore UEI's embedded system solutions at https://www.ueidaq.com/program...

Control/Monitoring options for your model on UEI Hardware - Part 1

See how to decouple your model from the Mathworks Simulink environment for stand alone operation using web sockets or TCP/IP with the UEISIM. #tcpip #software #interface #demo

Explore UEI's embedded system solutions at https://www.ueidaq.com/program...

UEI Technical Master Class: Keep Your Vehicle Deployment On Course

In this UEI Master Class, engineers from UEI, Mathworks, and Real-Time Innovations (RTI) discuss how Model-Based design is transforming the way engineers and scientists plan, build, and test their systems. #rti #mathworks #simulink #matlab #vehicle #testing #hardware #software #guide

Learn more about UEI's partnership with RTI at https://www.ueidaq.com/blog/sh...
Explore UEI's Technical Master Class series: https://youtube.com/playlist?l...

Using RTI to Share Data Among Control Models

UEI hardware and RTI provides a flexible, robust way for you to share information and data amongst networked control systems and hardware. In this video we demonstrate how easy it is to set up an DDS system and explain it can work for your application. #simulink #rti #dds #software #data #model

Learn more about UEI's partnership with RTI at https://www.ueidaq.com/blog/sh...